What Is Green Noise? The Mid-Frequency Sound Explained

A Colour Without a Standard

Ask two apps what green noise is and the answers will not match. White, pink, and brown noise each have a precise definition — a spectral slope of zero, minus three, or minus six decibels per octave — and any two generators built to those definitions produce the same spectrum. Green noise has no such definition. It is described by where its energy sits rather than by a slope: concentrated in the middle of the audible range, often quoted as being centred near 500 hertz. Because the description is loose, versions from different sources genuinely do sound different, and none of them is wrong.

What they have in common is an intention. Green noise is shaped to suggest the broadband hush of an outdoor environment — steady rain, distant surf, wind in leaves — while avoiding both the treble hiss of white noise and the low-end weight of brown.

Two Questions Behind One Search

Searches for green noise split into two groups that want different things. One group wants the sound: something to press play on, lighter than brown noise and gentler than white, to leave running while they study or fall asleep. The other group wants a number — which frequency the colour corresponds to, how wide the emphasis is, and how the shaping is done. A page that answers only the first leaves the second looking for a specification that does not exist, and a page that answers only the second never gets round to the sound.

The short answer for the first group: green noise is one of the five colours on the study tool at /en/study-noise and on the full mixer at /en/mixer, and switching between them costs a click. All five are generated at the same loudness, so moving from white to green changes the character of the sound and not its volume, which is what makes a side-by-side comparison worth anything. The sections below are the long answer for the second group.

Why the Colour Is Called Green

The noise colours borrow their names from light. White light contains the whole visible range at once, so a signal with equal power at every frequency became white noise, and pink and brown extend the analogy to spectra tilted towards the low end. Green continues it in the most literal way available. Visible light runs from roughly 380 to 700 nanometres, and green sits in the middle of that span, so a noise called green is a noise with its energy in the middle of the audible span.

The analogy is the whole justification for the name, and it is also the reason the term never acquired a standard. White and pink noise appear in the ASA/ANSI acoustical terminology standard, where each has a numbered entry and a slope. Green has no entry, because the name describes an intention — sound like the middle of the spectrum, sound like outdoors — rather than a measurable property. Anyone searching for the frequency of green noise is looking for a figure that no standards body ever fixed. The honest reply is a region instead of a number, and the edges of the region are a matter of convention.

Where It Sits Among the Others

Where green noise sits among the common noise colors
Noise colorEnergy emphasisDefined byTypical character
WhiteEqual across all frequencies0 dB/octave slopeBright, hissy
PinkTilted toward lower frequencies-3 dB/octave slopeBalanced, warm
BrownStrongly low-frequency-6 dB/octave slopeDeep, rumbly
GreenConcentrated in the mid-rangeNo standard; usually a band-pass around 500 HzNatural, ambient, like distant water

In practice green noise is white noise through a band-pass filter. That is not a criticism — it is what the shaping does, and it is why the result keeps the seamlessness of synthesised noise while landing in the frequency region that outdoor ambience tends to occupy.

Schematic line chart with frequency from 20 Hz to 20 kHz on a logarithmic axis and relative level from 0 to -24 decibels. A flat line marks white noise at 0 decibels. A second curve, green, rises to meet it at a peak near 500 hertz — the commonly quoted centre, drawn for illustration, where this site’s own green noise is centred at 800 hertz — and falls away on both sides, reaching about -17 decibels at 20 hertz and about -20 decibels at 20 kilohertz. A shaded vertical column covers 2 to 4 kilohertz, labelled as the most sensitive band; the green curve is already 4 to 10 decibels below its peak there. Most sensitive, 2-4 kHz 0 -6 -12 -18 -24 20 100 500 10k Relative level (dB) Frequency (Hz, logarithmic) White, flat Green
A schematic of the shaping, not a measurement of any particular generator: green noise is white noise through a band-pass, drawn here centred near 500 Hz, the figure most often quoted. No standard fixes the centre, and this site’s own filter is centred at 800 Hz, so treat the hump as illustrative. The shaded 2-4 kHz column is the band where ISO 226 puts peak hearing sensitivity — above the emphasis, not inside it.

The figure also complicates the explanation green noise is usually given. Mid-frequency emphasis is often justified by saying that human hearing is most sensitive in the middle of the range, but the equal-loudness contours in ISO 226 put peak sensitivity closer to 2–4 kHz — above the hump, in the region where a 500 Hz-centred band-pass has already begun rolling off. The honest account is simpler and does not need the physiology: natural ambient sound carries much of its energy in the mid-range, so a mid-range emphasis sounds like the outdoors because it resembles the outdoors, not because the ear is tuned to that band.

What a Centre Frequency Leaves Out

A band-pass filter is not specified by its centre frequency alone. It also has a width — how quickly the level falls away on either side of the peak — and the width changes the sound at least as much as the centre does. A narrow band-pass at 500 Hz sounds like hiss heard through a closed door: most of the spectrum is gone and what remains is obviously filtered. A wide one at the same centre is nearly flat across several octaves and sits much closer to pink noise. Both are mid-emphasised, both can be called green, and they are not the same sound.

The generator on this site centres its green noise near 800 Hz rather than 500, using two cascaded wide band-passes so that both the rumble and the hiss fall away at roughly 12 decibels per octave. That puts the peak at the geometric middle of 400 to 1600 Hz: two octaves of emphasis with gentle skirts rather than a tight notch. It is one defensible reading of a loose convention, not an implementation of a specification, and another generator’s green noise will be centred somewhere else with different skirts. The practical consequence is worth stating plainly — with green noise, compare the sound rather than the label, because the label guarantees nothing.

What the Mid-Band Is Good At

Masking works where the masker has energy. A sound can only be covered by a background that overlaps it in frequency, which turns the choice of colour from a matter of taste into a question with a defensible answer in at least one case: what is it that keeps interrupting.

The standard methods for calculating speech intelligibility divide the spectrum into bands and weight each band by how much it contributes to understanding words. Those weightings go back to French and Steinberg’s 1947 measurements and are codified in the Speech Intelligibility Index method, and they put the bulk of the contribution above 500 Hz and into the low kilohertz. Green noise overlaps the lower part of that range, so it covers conversation more effectively than brown noise does, while white noise, which has energy everywhere, covers it best of the five.

Low-frequency intruders invert the ranking. Traffic rumble, a fridge compressor, a washing machine two rooms away and footsteps from the floor above all sit below the band green noise emphasises, and brown noise is the better match for those. If what breaks a study session is a muffled conversation through a wall, the mid-band is where the useful energy is; if it is a bus pulling away outside, it is not.

When It Is Worth Trying

  • White noise feels too harsh and brown too heavy. Green sits between them and is the one many listeners describe as the most natural of the four.
  • Nature ambience without the loop. A field recording repeats audibly after a few minutes; shaped noise does not repeat at all.
  • A background that stays in the background. The mid-range balance masks distraction without drawing attention to itself.
  • Long sessions. Having neither treble hiss nor low-end pressure is what makes the sound easy to leave on for a few hours, and that matters more than any difference between colours measured over five minutes.

Hearing the Difference for Yourself

Because no two green noises match, listening is the only test that settles anything, and it takes about two minutes. Start the sound on /en/study-noise, set the volume low enough that a conversation in the room would still be comfortable, and leave it there — comparisons made at different volumes compare loudness, not spectrum. Switch from white to green and back a few times; the hiss disappearing while the body of the sound moves down is the band-pass at work. Then switch from green to brown, which moves the weight further down again and makes the mid-band emphasis obvious by contrast.

Two refinements are available on the mixer at /en/mixer. Layering green with a little brown adds low-frequency weight without bringing back the hiss, and the five-band equaliser shapes the summed result afterwards, so cutting the top band or lifting 250 Hz adjusts a colour rather than replacing it. For the definitions green noise is measured against, the comparison of white, pink and brown covers the three slopes in detail.

What to Expect for Sleep or Focus

Green noise works the way every noise colour works: by masking, raising the room’s background level so that sudden sounds stand out less. No research singles it out as better than the other colours for sleep or concentration, and the evidence on continuous noise as a sleep aid is weak and mixed even for white noise, which has been studied far more. Choosing between colours is a question of comfort rather than efficacy — the sound you are willing to leave running for hours is the one that will do you any good.

For studying, the question the colours cannot settle is whether to have a background sound at all. The Bayesian meta-analysis of 65 reading experiments that is the best summary of this literature ranked its distractors, and the ranking is what matters when choosing a masker: intelligible speech and lyrical music disrupted reading most, and plain noise least, though all three carried a reliable cost. Green noise belongs at the mild end of that ranking, which is the only sense in which it helps — it is the least bad of the three categories, not a category that improves on quiet.

Sampling It

Green noise is a mid-frequency, nature-flavoured member of the noise-colour family, defined by convention rather than by a standard. If white is too bright and brown too deep, it is the middle path worth sampling. Judge it as you would any masking sound: by whether the room feels calmer and the interruptions less sharp.

References

Frequently Asked Questions

What is green noise?

Green noise is a shaped background sound with its energy concentrated in the middle of the audible range, around 500 hertz. It is designed to resemble the broadband ambience of nature, such as steady rain or ocean surf, and sounds more balanced and natural than white or brown noise.

How is green noise different from pink noise?

Both are balanced compared with white and brown noise, but green noise pushes the emphasis into the mid-frequencies to sound more like natural outdoor ambience. Pink noise follows a strict minus-three-decibel-per-octave slope, while green noise is defined more loosely by its mid-range focus.

Is green noise good for sleep?

It can be, mainly because it masks sudden noises that cause awakenings. There is no strong evidence that green noise is better for sleep than other colors, so the best choice is whichever sound you find most comfortable to listen to for long periods.

Does green noise have an official definition?

Not a strict one. Unlike white, pink, and brown noise, which are defined by precise spectral slopes, green noise is described by its mid-frequency emphasis. As a result, versions from different sources can sound slightly different.

What frequency is green noise?

There is no official answer, because no standard defines green noise. Implementations converge on a band-pass emphasis somewhere in the middle of the audible range, most often quoted as centred near 500 hertz; the generator on this site centres near 800 hertz, the geometric middle of 400 to 1600 hertz. A centre frequency on its own does not describe the sound either, since the width of the band matters as much as its centre.

WhiteNoise.top

WhiteNoise.top builds free browser-based noise generators, mixers and breathing timers. Our articles explain the acoustics behind those tools and cite published research where it exists.